This section includes detailed descriptions of the Kirby Morgan® 37, as well as important operational specifications.
Weight:
KM 37 - 32.6 pounds
Helmet Shell:
Fiberglass, polyester resin, polyester gel coat, and carbon fibers
Control Knobs:
Polyurethane
Face Port/Lens:
Scratch Resistant Polycarbonate
Neck Dam:
Neoprene. Optional latex neck dam available
O-Rings:
Buna-N
Head Cushion:
Nylon bag filled with #4 Polyester foam
Recommended Lubricants:
All helmets and masks are lubricated at the factory with Christo-Lube®. Kirby Morgan recommends Christo-Lube® or Tribolube® for all gas train components. Dow Corning® 111 Silicone or equivalent may be used for helmet and mask components that are used with gas mixtures containing less than 50% oxygen.
Regulator:
The SuperFlow® 350 regulator on the Kirby Morgan® 37 offers high performance. The regulator has been tested at Dive Lab at Panama City, Florida. It meets all current U.S. Navy and European diving standards.
Cage Code:
The cage code for identifying KMDSI products for U.S. government purposes is 58366.
CR Standards:
These helmets meet or exceed all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
Temperature Limitations:
Use at water temperatures below 33 °F (1 °C) requires use of hot water shroud (P/N 525-100) and hot water.